Highly diastereoselective multicomponent synthesis of polysubstituted 2-hydroxy-2-trifluoromethylpiperidineswith four and five stereogenic centers

The Michael–Mannich cascade cyclization of cyano olefins, ethyl 4,4,4-trifluoro-3-oxobutanoate, aromatic aldehydes and ammonium acetate provides convenient stereoselective formation of ethyl 5,5-dicyano-4,6-diaryl-2-hydroxy-2-(trifluoromethyl)piperidine-3-carboxylates with fourstereogenic centers and dialkyl 4,6-diaryl-5-cyano-2-hydroxy-2-(trifluoromethyl)piperidine-3,5-dicarboxylates with five stereogenic centers. Ammonium acetate plays dual role, acting as a base and as a nitrogen source.     

Piezoelectric Nanogenerator Based on Electrospun Cellulose Acetate/Nanocellulose Crystal Composite Membranes for Energy Harvesting Application

Nanogenerators, as the typical conversion of mechanical energy to electrical energy devices, have great potential in the application of providing sustainable energy sources for powering miniature devices. In this work, cellulose acetate/cellulose nanocrystal(CA/CNC) composite nanofiber membranes were prepared by electrospinning method and then utilized to manufacture a flexible pressure-driven nanogenerator. The addition of CNC not only increased the content of piezoelectric cellulose I crystallization but also strengthened the mechanical deformation of the nanofiber membranes, which could greatly enhance the piezoelectric performance of CA/CNC composite membranes. The CA/CNC composite nanofiber membrane with 20%(mass fraction) of CNC(CA/CNC-20%) showed optimal piezoelectric conversion performance with the output voltage of 1.2 V under the force of 5 N(frequency of 2 Hz). Furthermore, the output voltage of the CA/CNC-20% nanogenerator device exhibited a linear relationship with applied impact force, indicating the great potential in pressure sensors.     

Atmospheric oxidation chemistry of 1–methoxy 2–propyl acetate initiated by OH radicals: kinetics and mechanisms

Kinetics and mechanism of the gas-phase reaction of CH₃C(O)OCH(CH₃)CH₂OCH₃ (MPA) with OH radicals in the presence of O₂ and NO have been investigated theoretically by performing a high and reliable level of theory, viz., CCSD(T)/6-311?+?G(d,p)//BH&HLYP/6-311++G(d,p)?+?0.9335×ZPE. The calculations predict that the H-abstraction from the ?CH₂?O? position of MPA is the most facile channel, which leads to the formation of the corresponding alkoxy radicals CH₃C(O)OCH(CH₃)C(O ?)HOCH₃ under atmospheric conditions. This activated radicals CH₃C(O)OCH(CH₃)C(O ?)HOCH₃ will undergo further rearrangement, fragmentation and oxidative reactions and predominantly leads to the formation of various products (methyl formate HC(O)OCH₃ and acetic anhydride CH₃C(O)OC(O)CH₃). In the presence of water, acetic anhydride can convert into acetic acid CH₃C(O)OH via the hydrolysis reaction. The calculated total rate constants over the temperature range 263–372?K are used to derive a negative activation energy (E_a= ?5.88 kJ/mol) and an pre-exponential factor (A?=?1.78×10^?12 cm³ molecule^?1 s^?1). The obtained Arrhenius parameters presented here are in strong agreement with the experimental values. Moreover, the temperature dependence of the total rate constant over a temperature range of 263?1000?K can be described by k?=?5.60 × 10^?14×(T/298?K)^3.4×exp(1725.7?K/T) cm³ molecule^?1 s^?1.     

Heterogeneous copper‐catalyzed oxidative coupling of oxime acetates with sodium sulfinates: An efficient and practical synthesis of β‐keto sulfones

An efficient and practical route to β‐keto sulfones has been developed through heterogeneous oxidative coupling of oxime acetates with sodium sulfinates by using an MCM‐41‐supported Schiff base‐pyridine bidentate copper (II) complex [MCM‐41‐Sb,Py‐Cu (OAc)₂] as the catalyst and oxime acetates as an internal oxidant, followed by hydrolysis. The reaction generates a variety of β‐keto sulfones in good to excellent yields. This new heterogeneous copper (II) catalyst can be easily prepared via a simple procedure from readily available and inexpensive reagents and exhibits the same catalytic activity as Cu (OAc)₂. MCM‐41‐Sb,Py‐Cu (OAc)₂ is also easy to recover and is recyclable up to eight times with almost consistent activity.     

Kinetic modeling of liquid-phase esterification of acetic acid with n-butanol using heterogeneous poly(o-methylene p-toluene sulfonic acid) as catalyst

Liquid-phase esterification of acetic acid with n-butanol to n-butyl acetate is studied in the presence of a polymeric catalyst, that is, poly(o-methylene p-toluene sulfonic acid). The performance of the proposed catalyst is compared with the other commercially available homogeneous and heterogeneous catalysts in terms of its activity. Experiments are conducted in an isothermal stirred batch reactor to study the effects of speed of agitation, temperature, and catalyst loading on the rate of reaction. A concentration-based pseudo-homogeneous (PH) kinetic model and activity-based kinetic models such as PH, Eley-Rideal (ER), and Langmuir-Hinselwood-Hougen-Watson (LHHW) models are developed. All the models considered in this study resulted in similar percentage deviation close to 4%. Further, kinetic models are validated through additional experiments, and it is observed that the simple concentration-based PH model is able to predict experimental data with least deviation compared to activity-based PH, ER, and LHHW models. The developed kinetic models are also tested using the Fisher-Snedecor test (F-test) and are found to be acceptable. By incorporating both modeling data and validation data, the overall absolute average deviations of different models are found to be concentration-based PH model 4.354%, activity-based PH model 5.006%, ER I model 5.189%, ER II model 5.403%, ER III model 5.437%, and LHHW model 6.104%, illustrating the superiority of the simple concentration-based PH model.     

Investigation of melamine and DOPO-derived flame retardants for the bioplastic cellulose acetate

In order to identify suitable flame retardant additives for the eco-friendly polymer cellulose acetate (CA), high-melting derivatives of the known flame retardant 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) were combined with the thermoplastic CA and the combustion properties were tested. CA mixtures with bis-phosphonamidates (EDA-DOPO and PIP-DOPO) showed distinct flame retardation effects and a reduction of peak heat release rates (PHRR) by up to 18%. CA mixtures with MDOP, a melamine salt of DOPA (an oxidation product of DOPO), also showed considerable effects and a reduction of PHRR by up to 27%. While producing more smoke than pure CA and CA plus melamine, owing to its aromatic component, MDOP was superior to the CA mixtures with DOPO, EDA-DOPO and PIP-DOPO in this regard. The mixture of CA with melamine gave rise to a distinctly reduced formation of toxic CO and smoke when compared with pure CA. Thus, these additives can be considered for future applications of CA-based polymers with enhanced flame protection.     

Emulsion Copolymerization of Vinyl Acetate and Vinyl Silanes: Kinetics and Development of Microstructure

The batch emulsion copolymerization of vinyl acetate with different vinyl silane functional monomers (vinyl trimethoxysilane [VTMS], vinyl triethoxysilane [VTES], and vinyl silanetriol [VSTO]) is studied. The nature of the silane strongly affects the development of the microstructure and crosslinking ability of the latexes. A combination of techniques (Soxhlet extraction, centrifugation, assymetric‐flow field flow fractionation AF4/MALS/RI) shows that the factor controlling the molar mass and crosslinking density is the degree of hydrolysis of the alkoxysilane, producing higher molar masses and degrees of crosslinking when the degree of hydrolysis is high. Thus, the copolymer containing VSTO produced a very crosslinked latex, the one with VTMS produced a latex with a low degree of crosslinking in the wet state that can yield high degrees of crosslinking upon drying, and the latex with VTES do not produce significant amounts of crosslinking neither before nor after drying.     

Copper-catalyzed methyl esterification of aromatic aldehydes and benzoic alcohols by TBHP as both oxidant and methyl source

A copper-catalyzed synthesis of methyl esters from aromatic aldehydes in the presence of tert-butyl hydrogen peroxide (TBHP) was developed via a radical reaction mechanism. TBHP acts not only as an efficient oxidant, but also as a green methyl source in such transformation. Moreover, this method could also be efficiently extended to the methyl esterification of benzylic alcohols.